Introduction:
The noack evaporation loss analyzer is suitable for determining the
evaporation loss of lubricating oils (particularly engine oils).
The noack evaporation loss tester is designed and manufactured according to ASTM D5800 Standard test
method for evaporation loss of lubricating oils by the Noack B
method.
The noack evaporation loss Analyzer is suitable to determine lubricating oil(especially internal
combustion engine oil) and the evaporation loss of lubricating base
oil at 250℃.
Features:
1. Latest technology: adopt B method to instead of A method. There
are no wood alloy in process of test to avoid environment pollution
and personnel injure.
2. Control method: adopting embedded operating system, high speed
microprocessor control, work steadily and reliably.
3. Printing way: with USB printer port,RS232 port, realize the
connection and communication between printers and computers.
4. Touching: adopting LCD display, convenient operation by touch
screen.
5. Safety: with the inner diagnostic program and many alarms,
realize the smart management when instrument’s fault.
6. Precision control: built-in high-capacity EPROM,real-time
recording the value of temperature and pressure at each minutes.
Main Parameters:
Specifications
1. Applicable standards: ASTM D5800, DIN51581,SH/T0059
2. Temperature control method: digital display PID temperature
control
3. Temperature control range: room
temperature～300±0.5℃,Resolution±0.1℃;
4. Heating method: Environmentally friendly light heating unit
5. Pressure regulation: high precision needle valve
6.Vacuum control:Vacuum pump and pressure gauge air filter;
7.Pressure range:0～25 mm H2O;
6. Pressure accuracy: Resolution ±0.05 mm H2O;Stability ±0.2 mm
H20;
7. Power supply:AC220V/50HZ;
8. Total power:2000W
9.Dimension:310*530*480mm;
10.Net weight:26KG
Accessories List
| No. | Name | Specifications | Quantity |
| 1 | Main Unit | | 1 Set |
| 2 | Evaporation crucible | | 1 Set |
| 3 | Glassware | | 1 Set |
| 4 | Temperature sensor | | 1 PC |
| 5 | Surge flask | | 2 PCS |
| 6 | Base of surge flask | | 1 PC |
| 7 | Filter flask | | 1 Set |
| 8 | Secondary filter element sleeve | | 1 Set |
| 9 | Primary filter element | | 2 PCS |
| 10 | Crucible wrench group | | 1 Set |
| 11 | Plastic burette | | 1 PC |
| 12 | Bit | φ 2mm | 1 PC |
| 13 | Silicone tube | Φ 6mm | 1 Meter |
| 14 | Silicone tube | Φ 5mm | 3 Meters |
| 15 | Power cable | | 1 Root |
| 16 | Cooler pan | | 1 PC |
| 17 | Protective glove | | 1 Pair |
More related testing equipment you may need:
- Open Cup Flash Point Tester
- Flash & Fire Point Tester for Petroleum Products
- Closed Cup Flash Point Tester
- Engler Viscometer
- Water Content Tester
- Rotational Viscometer
- Kinematics Viscometer
- Distillation Tester
- Density Tester
- Rust and Corrosion Tester
- Sulphur Content Tester
- Acid and Alkali Tester
- Dropping Point Tester
- Demulsibility Characteristics Tester
- Ash Content Tester
- Aniline Point Tester
- Low Temperature Tester(Including solidifying point, cold filter
plugging point, pour point, cloud point, and freezing point)
- Residue Carbon Tester
- Existent Gum Tester
- Vapor Pressure Tester
- Bomb Calorimeter
- Octane / Cetane Meter
- Lubricating Oils Foaming Characteristics Tester
- Petroleum Products Color Tester
- Petroleum Wax Oil Content Tester
- Automatic Interfacial Tension Tester
- Liquid Petroleum Products Hydrocarbon Tester
- Lubricating Oil Air Release Value Tester
- Petroleum Products and Additives Mechanical Impurities Tester
