Summary
This carbon residue analyzer is designed and made as per
GB/T17144-1997 Standard Test Method for Carbon Residue of Petroleum
Products-Micromethod. It is suitable to determine the amount of
carbon residue of petroleum products.
I. Main technical features
1. This carbon residue testing equipment adopts all-in-one
structure. It consists of two parts: electrical control chamber and
high temperature heating furnace. The design is simple and
reasonable.
2. It adopts single chip machine system. The instrument controls
the whole procedures automatically according to program preset.
3. The screen adopts all English interface. Operator can do
determination by prompts on the screen even no need to read the
operation manual. Easy to operate.
4. It controls the flow rate of nitrogen, temperature heating rate
and preset temperature automatically. Easy to adjust the flow rate.
The heating rate is accurate and temperature control is stable.
5. It collects test data and calculates results automatically. It
can print and save the data according to customer’s requirements.
6. The measurement range of this instrument is
0.10%(m/m)～30.0%(m/m). The test result is equivalent to Conradson
method if the carbon residue is higher than 0.10%(m/m).
7. The instrument can also be used to determine the petroleum
products composed of distillate oils which carbon residue is lower
than 0.10%(m/m). But the specimen shall be sampling to
10%(V/V)distillation residue according to GB/T6536 firstly.
8. It equips a electric balance to achieve the automation of sample
weighing and data input.
II. Main technical specifications
1. Power supply: AC(220±10%)V, 50Hz
2. Maximum power consumption: 1600W
3. Temperature of coke chamber: 500℃
4. Temperature control accuracy: ±2℃
5. Heating power: 1500W
6. Ambient temperature: 5℃～35℃
7. Relative humidity: ≤85%
8. Dimension: 520mm×360mm×525mm
