Home > Laboratory Test Equipment >

Multi-parameters Water Quality Meter for pH, pX, ORP,Ion concentration,TDS

Product Categories

Advanced Instruments Co.,Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Add to Cart

Multi-parameters Water Quality Meter Water Quality Tester

Functions

It has 5.7 inch large touch screen and Englishoperation system for easy use.
It can measure pH, pX, ORP, ion concentration, conductivity, resistivity, TDS, salinity, dissolved oxygen, saturation and temperature at the same time.
It provide many ion modes such as H⁺,Ag⁺,Na⁺,K⁺,NH4⁺,Cl^-,F^-,NO₃^-,BF₄^-,CN^-,Cu2+,Pb2+,Ca2+ The users can define ion modes by themselves if choosing corresponding ion sensors.
Water Quality Meter follows GLP practice and can store 2200 sets of measuring data.
Measuring data can be viewed, printed and deleted. The user can view current measuring data and the last calibration data.
It provides zero oxygen and full scale calibration,.
It has RS-232 and USB ports. If matched with specific data collecting software, it can be connected with PC.
This Water Quality Meter provides three measuring modes: continuous measuring, timing measuring and balance measuring mode.

Technical Specifications

No	Item	Specifications
1	Measuring range	pH/pX:(-2.000～19.999) pH/pX ORP:(-1999.99～1999.99)mV Conductivity: 0.000μS/cm～199.9ｍS/cm Resistivity: 0.00Ω.cm～20.00MΩ.cm T D S:0.000 mg/L～19.99g/L Salinity: (0.0～8.00)% Dissolved oxygen concentration: (0.00～19.99)mg/L Dissolved oxygen saturation: (0.0～199.9)% Ion: (0～19990),unit: ug/L,mg/L,g/L,mol/L,mmol/L Temperature:(-5.0～135.0)℃
2	Resolution	pH/pX:0.01,0.001pH O R P:0.1/0.01 mV Conductivity: 0.001μS/cm Resistivity: 0.01 Ω.cm T D S:0.001 mg/L Salinity: 0.1 % Dissolved oxygen :0.01mg/L Saturation:0.1% Temperaute:0.1℃
3	Accuracy	pH/pX:±0.002pX±1 digital pH/pX:±0.002pX±1 digit ORP:±0.03％FS Conductivity: ±0.5％FS Resistivity:±0.5％FS T D S:± 0.5％FS Salinity: ±0.1% Ion concentration:±0.5%±1 digit Dissolved oxygen:±0.50mg/L Dissolved oxygen saturation:±10.0% Temperature:±0.5℃±1 digit
4	Input impedance	>3×10¹²Ω
5	Dissolved oxygen response time	<=45s(90%respond at 20°C )
6	Automatic temperature range	pH:(0.0～100.0)℃ Conductivity: (0.0～100.0)℃ Dissolved oxygen :(0.0～40.0)℃
7	Power	DC(9V DC,800mA,inside-positve and outside-negative)
8	Dimension	250×195×100mm3
9	Weight	2kg

Multi-parameters Water Quality Meter for pH, pX, ORP,Ion concentration,TDS

Product Tags:

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Advanced Instruments Co.,Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Laboratory Test Equipment products from this supplier

Find Similar Products By Category:

Measurement & Analysis Instruments

Hot Searches: